Tribometer BOT 3000-E
Categories
SlipperinessLaboratories
Ceramic Tiles LabThe BOT-3000E (Binary Output Tribometer) can measure both static and dynamic coeffi cient of fl oor friction on a variety of test sliders in both wet and dry conditions. The BOT-3000E provides a printed record of test parameters and results which can strengthen courtroom credibility. Available with interchangeable sliders of Neolite, SBR, Four S, TRL, leather and hosiery.The BOT-3000E conforms to American National Standard B101.1, “Test Method for Measuring Wet SCOF of Common Hard-Surfaced Floor Materials”. It also conforms to ANSI B101.3, which measures dynamic coeffi cient of friction.
TECHNICAL SPECIFICATIONS
• Programmed test types: Wet / Dry / SCOF / DCOF (flying heel or user-defined test run distance)
• range: (SCOF, DCOF): 0.00 – 1.00 μ
• recharge time: approx. 12 hours when fully discharged
• fwd. speed: 20 cm/second (DCOF mode)
• Available sensor (slider) types: leather, Neolite, SBR, custom
• Measurement velocity (DCOF): 20cm/s +/- 5%
• Measurement range: 0,01 to 1,00 μ
• Measurement normal force: 21.3N +/-1%
• Contact patch area: 3 mm x 28mm
• Measurement system tolerance: 2%
• DCOF measurement distance: 10 to 50cm, incremental by 5cm (displays 4” to 20”)
• Ramp angle: 9,6 degrees maximum (declination)
• Verification mass: 1,36 Kg
• Operating/storage temp: 5 – 40 C
• Operating/storage humidity: 5 – 90% RH (non-condensing)
• Internal memory: 1000+ measurements
• Display: 480 x 272 LCD TFT display with 262K colors, LED backlit
• Printer: thermal, 48 mm wide, 8 dots/mm (Thermal printout information: test method, last calibration and verifi cation dates, sensor (slider) information, distance (DCOF), test results (min, avg, and max values read), temp and humidity, facility and location codes. Test data storage/transfer: USB fl ash drive (FAT32 format)
• Transferred fi le formats: PDF, TXT/CSV (.LOG fi les)
• Power source: RSI battery pack (NiMH battery, 12V nominal, 3,8Ah)
• Battery charger: 120-240VAC 50/60 Hz input
• Recharge time: approx. 12 hours when fully discharged
• Camera (forward facing): 1 megapixel, fixed focus
EQUIPMENT
• SBR and Neolite test feet (required to run ANSI/NFSI B101.1 [static] and B101.3 [dynamic] tests)
• 1 tube surfactant (required to run ANSI/NFSI B101.3 dynamic coeffi cient of friction tests)
• Verification mass
• Sensor validation reference surface
• On-board forward-facing camera 1 megapixel, fi xed focus
• Wire brush
• One roll of thermal paper tape.
• Power adapter (for 100-240V, 47-63 Hz, output 18V)
| Code | Model | External dimensions | Weight |
|---|---|---|---|
| GT1557 | BOT 3000-E | 290x200x170 mm | 6,9 Kg |
| Code | Description | Image |
|---|---|---|
| GT1588 | Slider leather test foot | Open image |
| GT1590 | Slider SBR test foot | Open image |
| GT1589 | Slider rubber test foot | Open image |
| GT1591 | Packing of 3 thermal print paper rolls | Open image |
| GT1592 | Surfactant, 13mL S LS (makes 1 US Gallon of solution) required for B101.3 testing | Open image |
| GT2710 | Reference strip surface (wet and dry test) | Open image |
