Flush-tec module for sanitary

TECHNICAL SPECIFICATION
• Water pressure adjustment in use: from 0.5 to 3.0 bar (EN 997 = 1.5 bar). Max. Temperature 70 ° C
• Electric pulse meter: 170 pulses X liter (resolution EN 997 = 100ml)
• Water used inside the collection tank, recycling with an electric pump controlled by the system
• Counting station for nr. 50 marbles with counting performed in about 5-10 seconds
• Execution time for sawdust test: about 120 seconds
• Water measurement scale: 1 0 – 50 kg load cell connected to the PLC 16 bit resolution A / D converter. Operating temperature: -20 ° C to 60 ° C. Resolution 3g (= 3ml)
• PLC 16BIT: machine cycle of 50 msc and 6 + 6 digital in / out 4 analog input
• Power supply: 220 V – 50/60 Hz
• Total installed electrical power: 950 W
• Dimensions: Width 2000mm, height 2150mm, depth 1420mm
• Machine weight: 300 kg (without water in the boxes)

Strandards:
EN 997 5.2.2 Class 1 – Washing of the basin
EN 997 5.2.3 Class 1 – Unloading of toilet paper
EN 997 5.2.4 Class 1 – Unloading of 50 plastic balls
EN 997 5.2.5 Sketches on the outside of the vessel
EN 997 5.2.6 Class 1 – Volume of rinsing after emptying
EN 997 6.9 Class 2 – Solid discharge and rinsing capacity after discharge for maximum discharge
EN 997 6.10 Class 2 – Unloading of toilet paper for reduced unloading capacity
EN 997 6.12 Class 2 – basin washing
AS 1172.1 3.1 Unloading of toilet paper at maximum discharge
AS 1172.1 3.2 Low-level toilet paper discharge
AS 1172.1 3.3 Discharge of solids
AS 1172.1 3.5 Outside sketches
AS 1172.1 3.6 Basin washing (sawdust)