Abrasimeter Iso
Categories
AbrasionLaboratory instrument to determine the resistance to abrasion on glazing tiles. The instruments are calirated according to the UNI EN ISO 10545-7. Other calibration on demand. The test specimen is locked by means by a rubber surface according to a standard, insert into a special support containing an abrasive load composed by stainless steel balls, distilled water, and corundum grain size F80 on a rotating and swinging plate standard defined.
TECHNICAL SPECIFICATIONS
• Steel structure powder epoxy painted
• Plexiglass safety protection
• Speed rotating defined and calibrated at 300 r.p.m
• Supply: 230 V – 50/60 Hz single phase (other voltage on request)
• Electronic control r.p.m
EQUIPMENT
• Float Glass calibration plate 100x100x6 mm
• ISO Set abrasive charges supplied with steels balls and corundum
| Code | Model | External dimensions | Power | Weight |
|---|---|---|---|---|
| GT1635 | ABRASIMETER ISO 3 | 490x800x445 mm | 0.4 kW | 58 Kg |
| GT0100 | ABRASIMETER ISO 4 | 490x800x445 mm | 0.4 kW | 60 Kg |
| GT0989 | ABRASIMETER ISO 8 | 660x800x1080 mm | 0.4 kW | 135 Kg |
| Code | Description | Image |
|---|---|---|
| GT0101 | Abrasive ISO load complete by steels balls and corundum | Open image |
| GT0102 | Calibration plate in Float Glass 100x100x6 mm | Open image |
| GT0103 | Instrument to identify the right side of Float Glass | Open image |
| GT0104 | Lot 5 kg corundum (aluminium fused oxide) white, grain F80 | Open image |
| GT0105 | Stainless steel balls AISI 420 Ø 1 mm - lot by 100 g | Open image |
| GT0106 | Stainless steel balls AISI 420 Ø 2 (1,97) mm - lot by 500 g | Open image |
| GT0107 | Stainless steel balls AISI 420 Ø 3 (3,18) mm - lot by 500 g | Open image |
| GT0108 | Stainless steel balls AISI 420 Ø 5 (4,76) mm - lot by 1 kg | Open image |
| GT0988 | Rubber gasket for balls holder | Open image |
| GT1119 | MCC abrasive load | Open image |
| GT1345 | Kit UNE 138001 N°1 Station | Open image |
| GT2559 | PEI abrasive load | Open image |
Related products
Box Isovision-Abralux Astm-Iso
Description:
The ISOVISION instrument is especially made to check the level of abrasion on glazed ceramic tiles according to ISO 10545-7.
Category:
AbrasionLaboratory:
Ceramic Tiles LabThe ISOVISION instrument is especially made to check the level of abrasion on glazed ceramic tiles according to ISO 10545-7.
Abrasimeter Deep Unglazed
Description:
Laboratory instrument to determine the resistance to deep abrasion in the unglazed ceramic tiles.
Category:
AbrasionLaboratory instrument to determine the resistance to deep abrasion in the unglazed ceramic tiles.